Dustwashers are designed to keep dirt and other elements outside of a properly lubricated joystick lever.
Available in Multiple Outer Diameters, Inner Diameter Specs
We can cut to the following outer diameters:
- 31 mm
- 38 mm
- 45 mm
- 55 mm
See below for a visual example:
If you are unsure of inner diameter of each lever model we currently support, you'll find it via the guide below:
| Lever Model | Inner Diameter (in millimeters) |
| Sanwa JLF with shaft (also compatible with PhreakMods EX-Groove detachable shaft | 12.75 mm |
| Sanwa JLF without shaft (also compatible with Hori Hayabusa lever shaft) | 9.35 mm |
| Seimitsu LS-32/38 with shaft | 12.34 mm |
| Seimitsu LS-32/38 without shaft | 10.64 mm |
| Seimitsu LS-56/58/62 with shaft | 12.30 mm |
| Seimitsu LS-56/58/62 without shaft | 9.06 mm |
| Seimitsu NOBI Standard and Pro | 10.3 mm |
| Crown/Samducksa (CWL BAT model, not KNEE Lever Neo) | 9.24 mm |
| PDP Injustice Battle Edition | 14.28 mm |
| Suzo Happ/Industrias Lorenzo shaft | 15.83 mm |
| Standard or Extended Length Balltop Shaft for IL Eurostick | 13 mm |
I own a lever model not mentioned in the list. How can I measure the inner diameter?
Because we cannot anticipate every lever on the market nor cater to individual levers not on the list, we may or may not have a similar size that will work with your model. A digital caliper tool is helpful in determining whether the shaft diameter of your lever is suitable. You can purchase one from various online retailers, such as Amazon.
What styles Can I choose for PX Pro Washers?
Dustwashers and other PX PRO items offer a choice to print as matte or gloss. You can see some examples of both in the photo gallery.
- Matte prints your custom image on top of the acrylic, diffusing some reflective light and appearing bright and vivid. It also has a slight textured appearance.
- Gloss prints below the acrylic, offering a sharp, glossy appearance. Colors are slightly muted under the plexi, and the appearance is smooth.
Comments